This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
tech:rccar [2016/01/10 21:42] – [DMESG output] bullar | tech:rccar [2016/01/13 21:38] (current) – [RC Car] bullar | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | ===== RC Car ===== | + | ====== RC Car ====== |
- | ====STOUT==== | + | The RC-Car consists of: |
- | Connect the camera module (8-bit | + | * stout (H2 start.now) with OV10635 based camera module (8-bit I/F) |
- | + | * PCB extension (RC mixer and Accel/Gyro chip) {{:tech:rc-car_pcb.pdf|}} | |
- | ====DMESG output==== | + | * 4WD drive chassis (Reely On-Road Chassis, CONRAD order no.: 238011-62) |
- | After boot the following messages could be find: | + | * Steering servo (Modelcraft Standard-Servo 4519 Analog-Servo. CONRAD order no.: 206464 |
- | <code text> | + | * Speed controller (Modelcraft Carbon-Series Fahrtregler, |
- | [ 2.971467] soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0 | + | * LiPo 7.4V 2200mAh |
- | [ 3.094623] ov10635 2-0030: ov10635 Product ID a6 Manufacturer ID 35 | + | |
- | [ 3.734729] soc-camera-pdrv soc-camera-pdrv.1: Probing soc-camera-pdrv.1 | + | * Optional: |
- | [ 3.751281] ov10635 1-0030: Failed writing register 0x0103! | + | * Transmitter Turnigy TGY 9X |
- | [ 3.764290] soc-camera-pdrv soc-camera-pdrv.2: Probing soc-camera-pdrv.2 | + | * Receiver Turnigy 9X8C-V2 8-channel |
- | [ 3.780825] ov10635 2-0031: Failed writing register 0x0103! | + | * WLAN EDIMAX EW-7811Un |
- | [ 3.793827] soc-camera-pdrv soc-camera-pdrv.3: Probing soc-camera-pdrv.3 | + | =====Blockdiagram===== |
- | [ 3.810367] ov10635 1-0031: Failed writing register 0x0103! | + | |
- | [ 3.823710] rcar_jpu fe980000.jpeg-codec: encoder device registered as / | + | |
- | [ 3.842579] rcar_jpu fe980000.jpeg-codec: decoder device registered as / | + | |
- | </ | + | |
- | + | ||
- | The command '' | + | |
- | <code text> | + | |
- | root@stout: | + | |
- | Driver Info (not using libv4l2): | + | |
- | Driver name : r8a7790-vin.0 | + | |
- | Card type : R_Car_VIN | + | |
- | Bus info : | + | |
- | Driver version: 3.10.31 | + | |
- | Capabilities | + | |
- | Video Capture | + | |
- | Streaming | + | |
- | Video input : 0 (Camera: ok) | + | |
- | Format Video Capture: | + | |
- | Width/ | + | |
- | Pixel Format | + | |
- | Field | + | |
- | Bytes per Line: 1280 | + | |
- | Size Image : 2048000 | + | |
- | Colorspace | + | |
- | Custom Info : deadbeef | + | |
- | Crop Capability Video Capture: | + | |
- | Bounds | + | |
- | Default | + | |
- | Pixel Aspect: 1/1 | + | |
- | Crop Capability Video Capture: | + | |
- | Bounds | + | |
- | Default | + | |
- | Pixel Aspect: 1/1 | + | |
- | Crop: Left 0, Top 0, Width 1280, Height 800 | + | |
- | Streaming Parameters Video Capture: | + | |
- | Capabilities | + | |
- | Frames per second: 25.000 (25/1) | + | |
- | Read buffers | + | |
- | + | ||
- | User Controls | + | |
- | + | ||
- | horizontal_flip (bool) | + | |
- | vertical_flip (bool) | + | |
- | + | ||
- | </ | + | |
- | + | ||
- | ====Capture==== | + | |
- | + | ||
- | Video can be captured with the tool '' | + | |
- | + | ||
- | **Example 1 (capture and store a MJPEG video):**\\ | + | |
- | <code bash> | + | |
- | avconv -f video4linux2 -pix_fmt yuv422p -s 1280x720 -r 25 -i /dev/video0 -c:v mjpeg result.mov | + | |
- | </ | + | |
- | + | ||
- | **Example 2 (capture and stream as H264 or MPEG2 video): | + | |
- | <code bash> | + | |
- | avconv -f video4linux2 -pix_fmt yuv422p -s 1280x720 -r 25 -i /dev/video0 -c:v libx264 -f mpegts udp:// | + | |
- | avconv -f video4linux2 -pix_fmt yuv422p -s 1280x720 -r 25 -i /dev/video0 -vcodec mpeg2video -r 25 -f rtp rtp:// | + | |
- | </ | + | |
- | + | ||
- | **Example 3 (capture one frame and store as picture): | + | |
- | <code bash> | + | |
- | ./ | + | |
- | convert -size 1280x720 -depth 16 -sampling-factor 4:2:2 ./ | + | |
- | </ | + | |
- | + | ||
- | ** Example 4**\\ | + | |
- | + | ||
- | <code bash> | + | |
- | ./ | + | |
- | + | ||
- | gst-launch-1.0 -v v4l2src device=/dev/video0 io-mode=dmabuf ! ' | + | |
- | + | ||
- | gst-launch-1.0 -v v4l2src device=/dev/video0 io-mode=dmabuf ! ' | + | |
- | + | ||
- | </ | + | |
+ | {{: |